Robotic Arm Project For Injection Machine (SS550V)

Suitable for 30-250 ton I.M.M Single arm Inverter driving ISO9001:2008

Robotic Arm Project For Injection Machine (SS550V)  

 

Rotary robot arm

Driven by pneumatic

Handy controller:

Swing-arm robot is mainly suitable for 30~250 ton horizontal injection molding machine for finished product or runner removed,single arm of up and down both with cut-and-cut-down types, the whole machine, drawing, spin up, spin-in are full-pressure-driven, economic name. standard Manipulator. may improve productivity(20%-30%), lower product defective rates and save labor, protect the operator's safety.

Aluminum alloy precision casting, lightweight, durable;

The drawing arm and upper and lower arm using high-strength aluminum alloy structure and beam with imported high rigidity and precision linear Rails,stable running,low noise,low friction,durable ;

Ultra thin fixture for samll opening distance of mould,Hall type clamp for confirmation,sensitive and reliable;

Auto-detection of security,such as the pressure is insufficient or unexpected failure will automatically alarm and automatic ejection prevention into cylinder,guarantee the mechanical arm and mold safety;

Reservation of vacuum aspiration,while absorbing clamp products,suitable for two formwork removal;

Choose double-truncated-arm,special design of the structure at x,substantially shortening the structure of the upper and Lower arm, shortens remove times,increase stability,suitable for lower height plant;

Have external output points,to control conveyor belt,undertake desk,auxiliary equipment;

Optional CE models that conform to the standard EUROMAP/SPI and configure standard interfaces.

General Specification:

Power Source	Power Capacity(KVA)	Working Pressure	Max. Allowed Pressure	Driven System	Control System
AC220v±10v 50/60HZ	0.2	5kgf / cm2 0.49Mpa	8kgf / cm2 0.8Mpa	Pneumatic Cylinder	GA28

 

Main Specification:

Model	SS350V	SS450V	SS550V/WV	SS650V/WV	SS750WV	SS850WV	SS950WV
Recommended IMM(ton)	15-30	30-60	50-100	50-150	150-200	200-280	200-280
Vertical Stroke(mm)	350	450	550	650	750	850	950
Crosswise Stroke(mm)	75		120		200
Swing Angle(degree)	60-90		60-90		60-90
Dry Take Out Time(sec)	0.6	0.7	0.8	0.9	1	1.2	1.4
Max. loading(kg)	2.5		3		3
Air Consumption(NI/cycle)	1.5	1.5	2.2	2.2	2.5	2.8	3
Net Weight (kg)	30	31	35/47	36/48	49	52	53
Gross Weight(kg)
Product Size(mm)
Package Size(mm)

W: telescopic type  V: with vacuum generator and vacuum jig (these model require additional air consumption of 10ni/cycle)

 

 

Robotic Arm Project For Injection Machine (SS550V)